Catalog
Loading...
Covering spare parts for Foton FT25 series including models:
FT250 25hp 2wd / FT254 25hp 4wd.
FT280 28hp 2wd / FT284 28hp 4wd.
FT300 30hp 2wd / FT304 30hp 4wd.
This section relates to Tractor parts only, relevant engine parts are here.
Covering spare parts for Foton FT25 series including models:
FT250 25hp 2wd / FT254 25hp 4wd.
FT280 28hp 2wd / FT284 28hp 4wd.
FT300 30hp 2wd / FT304 30hp 4wd.
This section relates to Tractor parts only, relevant engine parts are here.
Subcategories
Foton 25-30hp 3 Point Lifter parts.
Foton 25-30hp Air and Exhaust parts.
Foton 25-30hp Body and Cabin parts.
Foton 25-30hp Brakes parts.
Foton 25-30hp Cooling System parts.
Foton 25-30hp Clutch parts.
Foton 25-30hp Drivetrain Control parts.
Foton 25-30hp Electrical parts.
Foton 25-30hp Filters.
Foton 25-30hp Front Axle parts.
Foton 25-30hp Fuel System parts.
Foton 25-30hp Gearbox parts.
Foton 25-30hp Hydraulics parts.
Foton 25-30hp PTO parts.
Foton 25-30hp Rear Axle parts.
Foton 25-30hp Steering System parts.
Foton 25-30hp Towing Mechanism parts.
Foton 25-30hp Transfer Case parts.
Foton 25-30hp Wheels and Tyres parts.
M6 mounting threads. 1130mm outer cable with M8 length adjustment. 1360mm inner cable. Cover included.
M18x1.5 male cone compressor end. M18x1.5 female cone hose end. 600mm overall length.
Screw on type. 44mm OD thread. To fit tanks with 44mm thread, commonly horizontal filler type tank.
FLD-F4.5. M24x1.5 input thread. M20x1.5 output threads.
Left or Right side. 19mm taper with M14x1.5 thread to axle. M20x1.5 thread to steering cylinder.
19.6mm diameter x 67mm length. 6mm hole at 54mm from the top for R Clip.
31 teeth x 84mm diameter gear. 31 teeth x 64mm diameter mesh. 16 teeth x 35mm spline. 22mm height.
For air filter mounted above engine. 50mm ID. 190mm x 190mm elbow.
15mm diameter shaft. Requires 5x25 roll pin and 11.8x1.8 O Ring.
19 spline shaft. 28 teeth mesh. 25mm and 30mm bearing seats. 144mm overall length.
Canister 170mm dia x 190mm height. 50mm air hose. 170mm x 130mm filter element included.
38mm ID. 140mm x 90mm elbow centres. 25 series with KM385 engine.