6 inch Auger
Jinma 30-35hp Front Axle parts.
11 teeth gear. 20mm ID x 56mm OD x 22mm height.
Rubber compound construction. 85mm ID x 120mm OD.
8 x 145mm bolt PCD.
Front central drive. 8 teeth. 40mm and 35mm bearing seats. M33x1.5 thread.
110mm bolt centres diagonally. 31 teeth gear. 39mm ID. 55mm bearing seat.
Per pair. 35.5mm ID x 54mm OD x 0.3mm width.
Per pair. 16.8mm ID x 36mm OD x 3.1mm concave height.
45mm ID x 50mm OD x 50mm length.
15 teeth gear. 17 teeth x 28mm diameter spline. 45mm bearing seat.
14 teeth gear, 19 spline, 50mm bearing seat.
19 spline. 18 teeth gear. 40mm bearing seat.
6 x 127mm bolt PCD
Bolt length is usable length, does not include the hex head.
17 spline. 16 teeth. 35mm bearing seat.
16mm diameter x 113mm length.
235mm length. 19 spline both ends.
M16x1.5 external thread. M8x1.25 internal thread. 24mm spanner.
50mm length with M14x1.5 thread.
63mm ID x 85mm OD.
Cast iron construction.
M14x1.5 thread. 21mm spanner.
M14x1.5 thread. 27mm socket.
258mm ID x 5.3mm thickness x 268.6mm OD. This O Ring is known as either 258x5.3 or 268.6x5.3