6 inch Auger
Jinma 18-25hp Transfer Case parts.
33mm ID x 7.5mm height
39 teeth. 47mm ID.
Front and rear. 4x83mm bolt PCD
18-20hp tractors. 17 teeth. 25mm bearing seats. Circlip retainer type.
32mm OD x 69mm uncompressed length.
15 spline with hole for roll pin. Can be used for both front and rear.
42mm ID and 49mm ID. 140mm length.
15 spline. Has no hole for roll pin.
Approximately 42mm ID.
637mm length. 6 spline and 15 spline.
657mm length. 6 spline and 15 spline.
25-28hp tractors. Circlip retainer type. 19 teeth. 25mm bearing seats.
25-28hp tractors. Pin retainer type. 19 teeth. 25mm bearing seats.
20mm ID x 47mm OD x 14mm height. Unsealed both sides.