19mm output shaft. Click for full...
Enfly 40-55hp Series 40 Steering System parts.
100mm x 70mm bolt centres.
20mm and 39mm ID. 31mm height.
16Mpa. 80mL/r. M20x1.5 hydraulic threads. 12 spline input shaft. 58mm x 58mm mounting bolt centres.
M20x1.5 thread to knuckle. M16x1.5 hydraulic thread. 20mm eye. 350mm (eye centre) closed. 150mm stroke.
50mm ID cylinder end. 32mm ID rod end. 160mm overall length.
M20x1.5 left hand thread to tie rod. 21mm to 19mm taper with a M18x1.5 thread (castle nut).
M20x1.5 left and right hand threads. 810mm length.
M20x1.5 right hand thread to tie rod. 21mm to 19mm taper with a M18x1.5 thread (castle nut).
Cleanable spring loaded internal ZJY16 filter. 16mm inlet and outlet hose connections.
16mm Banjo to M16 cone.
M16 Cone both ends.
Is situated inside the power steering tank. Easily removed by pressing the plastic cap down to release then removing through the filler cap.
M20x1.5 thread to steering cylinder. M18x1.5 ball joint thread.