WG90 2.6hp engine. 240V 50Hz. Rated...
Enfly 40-55hp Series 40 Hydraulics parts.
100mm x 70mm bolt centres.
Left rotation. 14ml per revolution. 15mm OD input shaft with 4 splines. Side inlet and outlet with M8 threads at 38mm centres. 62mm x 62mm bolt centres, 87mm diagonally.
CBN-F314H. Left rotation. 14ml per revolution. 15mm OD input shaft with 4 splines. Side inlet and outlet. Both inlet and outlet have M8 threads at 38mm centres. 100mm x 70mm mounting bolt centres.
19mm x 4mm opening.
22mm hose connections both ends. Replacement filter 52x136. Replacement O ring 65x2.65. Filter included.
22mm hose connections both ends. Replacement filter 56x140mm with hole both ends. Filter included.
This valve is located inside the hydraulic reservoir.
M36x2.0 thread. 52mm bolt centres. Uses 32x2.65 O ring and Breather Cap M36.
Rubber seal to fit 18mm diameter.
M36x2.0 thread. Uses 32.5x3.55 O ring. Gearbox and Hydraulics.
38mm bolt centres. M16x1.5 thread. Uses O Rings 8x1.8 and 16x2.65
Male and female set with 1/2 inch NPT thread.
To suit 24mm Ball type and Pin type female quick connectors.