6 inch Auger
JD TY3100 Cylinder Block parts.
35mm diameter x 82.9mm length.
95mm ID. 116.9mm OD at cylinder lip. 109.9mm OD at O ring face. 190mm overall height.
100mm OD. 58.5mm pin height. 100mm overall height. Requires 3583 pin.
TY 3 cylinder engines and JD 4 cylinder engines. Set of 3 - 45mm, 54mm and 55mm ID.
3/8 pipe thread.
100mm ID. 118.9mm OD at cylinder lip. 113.5mm OD at O ring face. 185mm overall height.
100mm OD. 60mm pin height. 100mm overall height. Requires 3583 pin.
2 required per cylinder.
55mm bolt centres.
58mm height. 16mm diameter shaft. 34mm face.
8mm OD x 219mm length.
40mm bolt centres.
39mm OD x 35mm ID x 33.5mm width. 1 required per cylinder.
8mm OD x 222mm length.
258mm overall length.
Set includes 2 x compression rings and 1 x oil ring. 1 set required per cylinder.
11 piece gasket set for TY395 TY3100 type A engine. Type B engine has a different sump gasket. See description for full list of included gaskets.
TY395 and TY3100. 55mm front journal, 54 centre journal, 45mm rear journal. 40mm gear seat diameter with a 10mm W x 16mm L key slot. 419 overall length.
3/4-16 thread. Uses JX7085 or JX85100 filter.
1.45mm thickness for pistons with 35mm pin. 2 required per cylinder.
M14x1.5 thread. 95mm length. 18mm spanner.