Jinma 300 series Tractors. Includes...
JD TY395 Cylinder Block parts.
TY 3 cylinder engines and JD 4 cylinder engines. Set of 3 - 45mm, 54mm and 55mm ID.
95mm ID. 116.9mm OD at cylinder lip. 109.9mm OD at O ring face. 190mm overall height.
95mm OD. 58.5mm pin height. 100mm overall height. Requires 3580 pin.
3/8 pipe thread.
55mm bolt centres.
95mm ID. 117mm OD at cylinder lip. 109.9mm OD at O ring face. 185mm overall height.
2 required per cylinder.
58mm height. 16mm diameter shaft. 34mm face.
8mm OD x 219mm length.
40mm bolt centres.
35mm diameter x 79.9mm length.
39mm OD x 35mm ID x 33.5mm width. 1 required per cylinder.
8mm OD x 222mm length.
258mm overall length.
95mm OD. 60mm pin height. 100mm overall height. Requires 3580 pin.
11 piece gasket set for TY395 TY3100 type A engine. Type B engine has a different sump gasket. See description for full list of included gaskets.
TY395 and TY3100. 55mm front journal, 54 centre journal, 45mm rear journal. 40mm gear seat diameter with a 10mm W x 16mm L key slot. 419 overall length.
3/4-16 thread. Uses JX7085 or JX85100 filter.
1.45mm thickness for pistons with 35mm pin. 2 required per cylinder.
TY295, TY395 and JD495 A type engines. Set includes 2 x compression rings and 1 x oil ring. 1 set required per cylinder. These fit A series engines built pre 2009.
TY395 and JD495 B type engines. Set includes 2 x compression rings and 1 x oil ring. 1 set required per cylinder. These fit B series engines built after 2009.