12 volt. 50 litre. Fitted with a high...
Lijia SL4105 Timing Case parts.
40 teeth. 130mm OD x 40mm ID.
45mm bearing surface OD.
41 teeth. 134mm OD x 52mm ID.
45mm ID x 52mm OD.
20 teeth. 68mm OD x 40mm ID with a 12mm key slot.
40mm ID x 90mm OD.
40 teeth. 130mm OD x 30mm ID with an 8mm key slot.
+53mm bolt centres. 38mm ID
53mm bolt centres.
25mm bearing seats both sides. 40mm OD gear seat with a 12mm key slot. 4 x15mm rectangular spline.
Blanking plate cover gasket. 100mm x 70mm bolt centres. Used when a hydraulic pump is not fitted.
22 teeth gear. 40mm ID with a 12mm key slot.
8mm width x 22mm length x 7mm height.
100mm x 70mm bolt centres.
35mm bolt centres.
24mm diameter. 7.5mm tongue 8mm groove.
Tongue type. 25mm bearing seat both sides. 40mm gear seat with a 12mm key slot. 50mm overall length.