6 inch Auger
Lijia SL4105 Cylinder Block parts.
2 required per cylinder.
1/4 18tpi pipe thread.
16mm diameter shaft with 10mm cup. 34mm diameter face. 58mm overall length.
105mm ID. 125.8mm OD at cylinder lip. 196mm overall height.
Set includes 2 x compression rings and 1 x oil ring. 1 set required per cylinder.
35mm diameter x 79.9mm length.
105mm OD. 58mm pin height. 103mm overall height. Requires 3680 pin.
8mm shaft. 217mm overall length. 13mm OD x 9mm ID cup.
12 volt. 3/8 NPT thread. 40mm thread and sensor length. 19mm spanner.
CA10. 1/4 NPT thread
55mm bolt centres.
52mm bearing journals. 30mm gear seat with 8mm key slot. 14 teeth oil pump gear. 43.8mm lobe OD.
SL 3 and 4 cylinder engines. 55mm mounting bolt centres. Pressure relief on the left hand side. JX85100C spin on filter included.
36mm diameter x 79.9mm length.
1.45mm thickness. Two required per cylinder.
1.45mm thickness for pistons with 35mm pin. 2 required per cylinder.
257mm length x 98mm width.