19mm output shaft. Click for full...
Lijia SL4100 Cylinder Block parts.
100mm ID. 121.7mm OD at cylinder lip. 196mm overall height.
2 required per cylinder.
1/4 18tpi pipe thread.
BT and ABT engines. Set includes 2 x compression rings and 1 x oil ring. 1 set required per cylinder.
100mm OD. 58mm pin height. 103mm overall height. Requires 3680 pin.
16mm diameter shaft with 10mm cup. 34mm diameter face. 58mm overall length.
8mm shaft. 217mm overall length. 13mm OD x 9mm ID cup.
12 volt. 3/8 NPT thread. 40mm thread and sensor length. 19mm spanner.
CA10. 1/4 NPT thread
55mm bolt centres.
52mm bearing journals. 30mm gear seat with 8mm key slot. 14 teeth oil pump gear. 43.8mm lobe OD.
SL 3 and 4 cylinder engines. 55mm mounting bolt centres. Pressure relief on the left hand side. JX85100C spin on filter included.
36mm diameter x 79.9mm length.
100mm OD. 61mm pin height. 103mm overall height. Requires 3580 pin.
35mm diameter x 79.9mm length.
1.45mm thickness. Two required per cylinder.
1.45mm thickness for pistons with 35mm pin. 2 required per cylinder.
257mm length x 98mm width.