WG90 2.6hp engine. 240V 50Hz. Rated...
Laidong 3T30 Timing Case parts.
10mm width x 22mm length x 8mm height.
10mm diameter shaft. Uses 6x1.8 O Rings.
48 teeth x 131mm OD gear. 30mm ID with 8mm key slot.
12.5mm ID x 46mm OD.
29mm bolt centres. 58mm OD.
12.5mm ID x 30mm OD x 5.5mm height.
115mm mounting bolt centres. 87mm pump bolt centres for use with 62mm x62mm hydraulic pumps.
Fits between the drive assembly and the pump connecting plate. 76mm ID. 115mm bolt centres.
4L and 3T engines. 86mm diameter housing with 115mm bolt centres. 26 teeth gear. Uses bearing 7009AC and bearing 6005.
4L and 3T engines. Fits between the timing case and the transition drive assembly. 87mm ID. 115mm bolt centres.
4x119.5mm mounting bolt PCD.
4L and 3T engines. 28mm bolt centres. 44mm bearing seat.
24 teeth x 68mm diameter. 36mm ID with 10mm key slot. 27mm height.
168mm OD. 36mm ID with 10mm key slot. 55mm oil seal face. 13mm V.
36mm ID. 42mm bolt centres.
62mm x 62mm bolt centres, 87mm diagonally.
Angular contact bearing designed to accommodate both axial and radial loads. (IDxODxW) 45x75x16
10mm width x 63mm length x 8mm height.