6 inch Auger
Laidong KM390 Timing Case parts.
Uses 72x52x12 front seal.
45mm diameter x 24mm height bearing face. 32mm bolt centres.
62mm x 62mm bolt centres, 87mm diagonally.
28 teeth. 35mm bearing seats. 4Tx15mm internal spline for pump.
56 teeth. 123mm OD x 50mm ID x 18mm height. 6x66mm mounting bolt PCD.
16mm shaft taper with a 3mm key slot. M6x1.0 threads with a 6x68mm PCD.
53 teeth. 116mm OD x 45mm ID (bearing surface) x 24mm height.
9mm and 15mm bolt holes at 62mm centres.
84mm OD. 42mm bearing seat. Uses 6302Z bearing and internal circlip 42.
48mm OD x 12mm ID.
56 teeth. 123mm OD x 34mm ID with a 10mm key slot.
34 teeth. 76mm OD x 38mm ID with a 10mm key slot.