Jinma 300 series Tractors. Includes...
Foton 25-30hp PTO parts.
15mm diameter shaft. Requires 5x25 roll pin and 11.8x1.8 O Ring.
To fit 15mm shaft. 360mm overall length. M10x1.5 knob thread. Requires M5x25 Roll Pin.
For 15mm shaft. M10x1.5 thread. 187mm overall length. Uses 5x25 roll pin.
15 spline. 31mm dia fork surface. 40mm overall length. 42mm overall width.
250.41.106. 6 x 1 3/8 inch output spline. 22 teeth gear spline. 25mm front bearing face. 35mm rear bearing face. 35mm seal face.
Plastic construction. M52x1.5 thread. 108mm overall length. 53mm diameter.
Updated version to help avoid the paddle dislocating. See the pictures for dimensions.
15mm shaft with 5mm hole for roll pin. 8mm hole for fork head. Uses 11.8x1.8 O ring.
Fits 15mm shaft. 76mm between legs. Requires 8.7mm detent ball and 8.5mm spring.
M10x1.5 thread. 57mm overall height.
250.41A.108. 42 teeth gear. 32 teeth mesh. 30mm ID.
Previously 250.41A.102. 16 teeth and 11 teeth gears. 22mm 16T gear width. 27.7mm 11T gear width. 25mm and 30mm bearing diameters. 10mm pilot bearing diameter. 398mm overall length.
Previously 250.41A.102. 16 teeth and 11 teeth gears. 24mm 16T gear width. 29mm 11T gear width. 25mm and 30mm bearing diameters. 10mm pilot bearing diameter. 398mm overall length.
Deep groove bearing 106. Dimensions 30x55x13 (IDxODxW)
Dimensions 35x72x17 (IDxODxW)
Dimensions 25x62x17 (IDxODxW)
8.5mm diameter. 24mm uncompressed height.
821mm length. 12 spline with 17mm bearing seat. 15 spline with 10mm pilot.