Reduces shedding by up to 90%....
Luzhong 40-55hp Hydraulics parts.
M36x2.0 thread. 52mm bolt centres. Uses 32x2.65 O ring and Breather Cap M36.
Rubber seal to fit 18mm diameter.
38mm bolt centres. M16x1.5 thread. Uses O Rings 8x1.8 and 16x2.65
22mm hose connections both ends. Replacement filter 52x136. Replacement O ring 65x2.65. Filter included.
22mm hose connections both ends. Replacement filter 56x140mm with hole both ends. Filter included.
M36x2.0 thread. Uses 32.5x3.55 O ring. Gearbox and Hydraulics.
This valve is located inside the hydraulic reservoir.
Plastic construction. 12mm ID for shaft. Requires 5x25mm roll pin.
CBN-F314H. Left rotation. 14ml per revolution. 15mm OD input shaft with 4 splines. Side inlet and outlet. Both inlet and outlet have M8 threads at 38mm centres. 100mm x 70mm mounting bolt centres.
Left rotation. 14ml per revolution. 15mm OD input shaft with 4 splines. Side inlet and outlet with M8 threads at 38mm centres. 62mm x 62mm bolt centres, 87mm diagonally.
58mm overall length. Used for clamping 12mm and 20mm hard lines together.
19mm x 4mm opening.
100mm x 70mm bolt centres.
Male and female set with 1/2 inch NPT thread.
To suit 24mm Ball type and Pin type female quick connectors.