1000mm width. Suitable for all LW...
Luzhong 25-30hp Hydraulics parts.
56mm mounting bolt centres. 38mm line bracket bolt centres. 90mm overall length.
58mm overall length. Used for clamping 12mm and 20mm hard lines together.
Plastic construction. 12mm ID for shaft. Requires 5x25mm roll pin.
FLD-F4.5. M24x1.5 input thread. M20x1.5 output threads.
M18 Banjo to 1/2-14. 520mm overall length.
Rubber construction. 70mm ID. 3x88mm PCD bolt centres (76.2mm between bolts).
Internal 3PL. M22x1.5 thread. 64mm diameter. 165mm overall length. Uses 18x2.65 O ring.
Rubber construction. Corner bolt centres 150mm x 290mm.
M27x2.0 thread. 135mm overall length including dipstick. Dipstick marks 70mm and 85mm from seat.
20mm Banjo at priority valve end. 18mm Banjo at multivalve end. 1070mm overall length. 480mm overall height.
M20x1.5 thread cone both ends. Connectors at 200mm centres.
Bent hard pipe. M20x1.5 cone both ends. 430mm overall length.
Straight hard pipe. M20x1.5 cone both ends. 430mm overall length.
Straight hard pipe. M18 Banjo to M20x1.5 cone. 395mm overall length.
All hydraulic threads M18x1.5. Control levers included.
Bent hard pipe. M18 Banjo to M20x1.5 cone. 395mm overall length.
M18x1.5 hydraulic threads. 72mm and 76mm mounting bolt centres. Uses O rings 13x2.65 and 19x2.65
38mm bolt centres. M16x1.5 thread. Uses O Rings 8x1.8 and 16x2.65
Left rotation. 14ml per revolution. Side inlet - rear outlet. 8mm x 15mm tongue input shaft. 62mm x 62mm bolt centres, 87mm diagonally. M18x1.5 outlet thread.
62mm x 62mm bolt centres, 87mm diagonally.
Left rotation. 14ml per revolution. 8mm x 15mm tongue input shaft. Side inlet and outlet. Both inlet and outlet have M8 threads at 38mm centres. 100mm x 70mm mounting bolt centres.
M20x1.5 and M16x1.5 threads.