Reduces shedding by up to 90%....
Luzhong 25-30hp Front Axle parts.
90mm ID. 6x108mm PCD (54mm measuring between hole centres).
18 teeth gear. 18 teeth spline. 83mm diameter. 51mm height.
50mm ID. 72mm OD. 8mm height.
50mm ID x 55mm OD x 35mm height.
15 teeth gear. 18 teeth spline. 72mm diameter. 31mm height.
177mm ID. 210mm OD. 10x193mm PCD bolt centres.
86mm ID. 131mm OD. 6x108mm PCD bolt centres.
179mm ID. 203mm OD. 8x197mm PCD bolt centres.
3/8-18 thread. 25mm overall height. 19mm spanner.
430mm length. 24mm x 15 teeth spline both ends.
440mm length. 24mm x 15 teeth spline both ends.
50mm ID. 61mm OD. 0.4mm thickness.
For M8 bolt. 41mm overall length.
42mm ID. 48mm OD. 6.5mm height.
Square head. NPT 1/8-27 thread.
M10x1.5 both ends x 55mm overall length.
13 teeth gear. 15 teeth spline. 65mm diameter. 40mm height.
30mm ID x 40mm OD. 5mm height.
Snap rings only. 40mm OD x 30mm ID x 2.9mm height.
Required if changing from type A to type B axle. Snap rings 40mm OD x 30mm ID x 2.9mm height. Snap ring housing 49.5mm OD.
11 teeth gear x 50mm diameter x 20mm height. 16mm ID.
15 teeth gear. 15 teeth x 24mm spline. 61mm diameter. 37mm height.
2 required. 45mm between bolt centres.
M14x1.5 thread. 23mm OD. 20mm overall length.