19mm output shaft. Click for full...
Luzhong 25-30hp Electrical parts.
12v 21W. 93mm x 85mm lens size. M8 mounting bolt. Globe included.
Oil pressure / oil warning light. 1/4 NPT thread. 85mm overall length. 45mm overall diameter.
12 volt. 3/8 NPT thread. 23mm thread and sensor length. 19mm spanner.
10mm mounting thread. Normally closed. Will activate when the switch pin is released.
295mm length. 12mm chassis bolt hole.
M16x1.5 thread. 55mm thread length.
510Hz. Vibration mounting strap included.
28 watt. 3 Pin.
12 volt. 60 amp. 30mm mounting bolt centres.
Normally open. M10x1.5 thread with 23mm adjustment length. 4mm bullet electrical connectors.
16mm x 2mm groove for cutout. 10mm ID.
28mm x 4mm groove for cutout. 20mm ID.
Main power fuse connected to the starter motor. 10mm washer terminal to 8mm spade terminal. 150mm o/a length.
BA15d non indexed pins.
BA15d non indexed pins
12 volt. 45/40 watt.
H4 base. 12 volt. 60/55 watt
5 pin male connector 39mm x 12mm. 24mm mounting hole. Acc Ign Preheat Start.
14V 350W 25A. 90mm diameter pulley. 2JF350. KM385T-12100-2A.