Jinma 200 series Tractors. Includes...
Covering spare parts for Enfly Tractors.
These categories relate to Tractor parts only. Relevant engine parts as determined by the name plate on the engine itself are here.
Covering spare parts for Enfly Series 40 including models:DQ400 40hp 2wd / DQ404 40hp 4wd.DQ450 45hp 2wd / DQ454 45hp 4wd.DQ500 50hp 2wd / DQ504 50hp 4wd.DQ550 55hp 2wd / DQ554 55hp 4wd.DQ604 60hp 4wd.
This section relates to Tractor parts only, relevant engine parts are here.
Suit any diesel engine. 0.5 revolution when power applied - 0.5 revolution when power disconnected. Built in relay.
50mm ID (shaft size). 65mm bearing seat. 85mm overall length.
M16x1.5 thread. Replacement O ring 14x2.65.
79mm diameter x 240mm height. 61mm throat. 99mm OD seal.
65x410x65mm elbow centres to fit MY low brackets. 4 x 11mm bolt holes with 56mm x 60mm centres both ends.
Per pair. To fit 950 inside width Sunshades. 50mm mounting bolt centres. 150x102mm sunshade bolt centres.
Tank only measures 430mm width x 360mm height x 290mm depth. 71mm cap thread. Cap and filter screen included.
Bearing 6008 in a rubber cushion. 12Tx26mm splined shaft both ends.
Right inlet. Left outlet. 4 core. 350mm mounting bolt centres. 38mm inlet and outlet. 600mm overall height x 470mm width. 38mm cap.
31.5mm diameter x 133mm usable shaft length.
80mm ID. 83mm x 58mm x 67mm bolt centres.
Crown and pinion gear set. Includes 300.38.115 as a matched set. Crown has 38 teeth. Pinion has 11 teeth, 31 and 22 splines, M39x1.5 thread, 40mm and 50mm bearing seats.
3 bolt x72mm PCD (62mm between holes). 95mm overall length.
15 spline. 223mm OD x 5.6mm width.
Commonly fitted to 40 series 2wd and 4wd Tractors with rear Turf tyre.
100mm x 70mm bolt centres.
80mm height x 21mm width. 26.5mm ID eye.
1200mm length. 10mm washer terminal and (+) battery terminal.
20mm and 39mm ID. 31mm height.
123mm overall length. 10mm holes for pivot pin.
69mm diameter x 200mm height. 55mm throat. 65mm OD seal.
Left rotation. 14ml per revolution. 15mm OD input shaft with 4 splines. Side inlet and outlet with M8 threads at 38mm centres. 62mm x 62mm bolt centres, 87mm diagonally.
70mm ID. 89mm OD. 1.95mm thickness.