Fitted with a high flow 7.5 litres...
Enfly 404, 454, 504, 554 and 604 Front Axle parts. Either a JLD or HX front axle can be fitted to 4wd models. HX and JLD specificparts are labeled HX or JLD. Look for the model type cast into the casing.
M16x1.5 thread. Replacement O ring 14x2.65.
70mm ID. 89mm OD. 1.95mm thickness.
42 teeth gear. 24 teeth x 51mm diameter spline. 40mm spline depth. 250mm diameter.
18Tx29mm spline both ends. 235mm length. To suit JLD front axle.
11 teeth gear. 18Tx29mm spline. 40mm bearing seat. 59mm overall height.
44mm ID x 57mm OD x 5mm height.
24Tx50mm spline. 6x161 wheel bolt PCD. 50mm bearing seat. 190mm dia x 138mm height overall.
16 teeth x 97mm OD gear. 18 spline. 55mm bearing seat.
11 teeth x 77mm OD gear. 18Tx30mm spline. 45mm bearing seat.
18Tx29mm spline both ends. 308mm overall length.
12Tx26mm spline. 10T gear. M30x1.5 thread. 35mm bearing seats. 193mm overall length.
23 teeth x135mm OD gear. 25Tx66mm spline. 80mm bearing seat. 42mm overall height.
20mm ID x 42.5mm OD x 4.7mm height. 1.5mm thickness.
8mm diameter x 45mm length.
20mm OD x 135mm length. 8mm hole for retainer pin.
12 teeth gear. 54mm OD. 20mm ID.
20 teeth gear. 18Tx29mm spline. 42mm bearing seat. 45mm overall height.
18Tx29mm spline both ends. 539mm overall length.
M16x1.5 thread. 24mm spanner.
50mm ID x 55mm OD x 39mm height.
90mm ID x 95mm OD x 55mm height.
Aluminium construction. 258mm ID x 276mm OD.
30mm ID x 40mm OD.
62.2mm ID x 73.5mm OD x 8.2mm height.