WG200 6.7hp engine. Displacement...
JD TY295 Cylinder Block parts.
95mm ID. 116.9mm OD at cylinder lip. 109.9mm OD at O ring face. 190mm overall height.
95mm OD. 58.5mm pin height. 100mm overall height. Requires 3580 pin.
3/8 pipe thread.
55mm bolt centres.
95mm ID. 117mm OD at cylinder lip. 109.9mm OD at O ring face. 185mm overall height.
2 required per cylinder.
Set of two pieces for TY290 TY295 TY2100 engines. 45mm and 55mm ID.
58mm height. 16mm diameter shaft. 34mm face.
8mm OD x 219mm length.
40mm bolt centres.
35mm diameter x 79.9mm length.
39mm OD x 35mm ID x 33.5mm width. 1 required per cylinder.
8mm OD x 222mm length.
95mm OD. 60mm pin height. 100mm overall height. Requires 3580 pin.
Set includes 2 x compression rings and 1 x oil ring. 1 set required per cylinder.
3/4-16 thread. Uses JX7085 or JX85100 filter.
1.45mm thickness for pistons with 35mm pin. 2 required per cylinder.