Fitted with a high flow 7.5 litres...
Laidong KM390 Cylinder Block parts.
Wet cylinder sleeve. 90mm ID. 108.3mm OD at cylinder lip. 162mm overall height.
2 required per cylinder.
80mm bolt centres. 40mm x 58mm throat.
1/4 NPT thread male and female. 54mm overall length.
30mm OD x 9mm height cup.
Set of 3 pcs. All 50mm OD with a 46mm ID bearing surface.
347mm overall length.
46mm diameter bearing journals (all). 34mm diameter x 29mm length gear seat with a 10mm width x 24mm length key slot. 382mm overall length.
8mm shaft. 208mm overall length. 13mm OD x 9mm ID cup.
14mm diameter shaft with 9mm cup. 26mm diameter face. 50mm overall length.
Set includes 2 x compression rings and 1 x oil ring. 1 set required per cylinder.
28mm diameter x 71.9mm length.
90mm OD. 48mm pin height. 85.6mm overall height. Requires 2872 pin.
Filter housing only. 70mm mounting bolt centres. Takes a JX0811A spin on filter.
Most gaskets except Oil sump gaskets, cylinder head gasket and rocker cover gasket.
Seal between the cylinder block and the crankcase, 2 required. 4.5mm diameter x 370mm length.