Jinma 200 series Tractors. Includes...
Laidong KM385 Timing Case parts.
10mm width x 22mm length x 8mm height.
10mm diameter shaft. Uses 6x1.8 O Rings.
80mm diameter housing with 109mm bolt centres. 24 teeth gear. Uses bearing 7008AC and bearing 6005.
When hydraulic pump type housing is fitted.
When hydraulic pump type housing is not fitted.
106mm OD with 39 teeth. 44mm ID bush.
109mm mounting bolt centres. 87.7mm pump bolt centres with M10x1.5 threads. 67.9mm OD x 52mm ID bearing retainer.
40mm and 25mm bearing seats. 40mm gear seat with 10mm key slot. 8mm slot for pump drive. 72mm overall length. Uses bearing 7008AC and bearing 6005.
109mm bolt centres. 81mm ID.
48 teeth x 131mm OD gear. 30mm ID with 8mm key slot.
12.5mm ID x 46mm OD.
168mm OD. 36mm ID with 10mm key slot. 55mm oil seal face. 13mm V.
24 teeth x 68mm diameter. 36mm ID with 10mm key slot. 27mm height.
48 teeth x 131mm diameter. 50mm ID.
16mm taper shaft with key slot. 100mm OD. M8x1.25 threads.
29mm bolt centres. 58mm OD.
6x160mm bolt centre PCD.
12.5mm ID x 30mm OD x 5.5mm height.
44mm diameter x 25mm height bearing face. 28.5mm bolt centres.
140mm ID. 6x160mm bolt PCD.
36mm ID. 42mm bolt centres.
62mm x 62mm bolt centres, 87mm diagonally.