1000mm width. Suitable for all LW...
Luzhong 25-30hp Body and Cabin parts.
200mm overall length. M8x1.25 thread.
290mm bolt centres.
38mm ID over steering column. 90mm overall height.
70mm overall length. 16mm mounting bolt centres. Fitted to early 25 series with flip forward hood.
400mm OD. 19mm tapered spline. Active horn button.
5mm plate. 50mm mounting bolt centres to ROPS. 240mm height.
To fit 16mm shaft and 50mm cutout hole.
28mm x 4mm groove for cutout. 20mm ID.
80mm overall length. 16mm x 4.5mm slot for lever.
Self adhesive red on silver.
To suit older model forward tilting bonnet.
16mm x 2mm groove for cutout. 10mm ID.
14mm mounting bolt holes. 1230mm length fully extended.
Measures 340mm wide. 75mm high. 120mm deep.
Pair, left and right. Convex mirror 240mm x 135mm with M8x1.25 thread. Bracket 400mm overall with M12x1.75 thread.
645mm pin centres extended.
Seat 420mm wide x 400mm deep. Back 420mm wide x 330mm high. M8x1.25 threaded inserts.
2 pieces overlapping. Tunnel 225mm wide x 185mm high x 440mm length.
Per pair. Swivel up with adjustment. Armrest 280mm length. 200mm mounting bracket length. Simply bolt to rear of seat.
Thin copper tube. M10x1.0 thread both ends. 1250mm length.
Inside mounting width 950mm. 25 series and 40 series.
Includes 4pcs M12x60mm bolts. 6pcs M10x30mm bolts. 6pcs large M10 washer. Associated nuts and spring washers.